Jump to content

074KU

Members
  • Posts

    4
  • Joined

  • Last visited

074KU's Achievements

Dirt

Dirt (1/9)

0

Reputation

  1. For Tekkit 1.2.9g Waypoints will not properly save in Mystcraft Dimensions when using Rei's Minimap. This does not matter if you are the host of the server (opening world to LAN) or using dedicated server.
  2. For Tekkit 1.2.9g It seems it is possible to create infinite liquid by placing an empty portable tank in a Fluid transposer (where it will migrate to the output slot) Then adding an Extra Utilities Drum into the input slot, the drum will "empty" and continue (VERY QUICKLY) below 0, I had a drum at over -2000000000000 in 2 minutes this will place the corresponding positive amount of fluid in the transposer (in excess of maximum capacity.) At this point it is then possible to remove the drum and tank and still keep fluid amount (or leave in for truly infinite fluid) This possibly seems connected with the fact that sometimes when a placed (or held) drum is emptied it will not revert back to an empty drum but rather keep its fluid designation with 0 fluid inside it, when right clicked it contains "a few drops of.." (possibly because the drum has +0 fluid rather than 0 or -0 Fluid?)
  3. For Tekkit 1.2.9g I have discovered that certain Thermal expansion blocks (tesseracts, pulverizes, redstone furnaces etc.) disappear (do not drop, cannot be made to come back) when placed within ~1 chunk of multiple (running) oxygen sealers. The only fix that seems to work for this is: 1. Remove all oxygen sealers (disabling seal WILL NOT WORK) 2. Open a hole in your previously sealed space (I did a 1x2) 3. Placing thermal expansion items. 4. Fix hole. 5. Replace oxygen sealers and re-initiate. This bug does not appear to effect any other mod pack or items from Thermal expansion such as pipes or already placed items that are effected when Sealer is running.
  4. Hi all first post here outlining a bug and short term fix. Been playing tekkit for years and have finally decided to give space a go. I have discovered that certain Thermal expansion blocks (tesseracts, pulverizes redstone furnaces etc.) disappear (do not drop, cannot be made to come back) when placed within 1 chunk of multiple oxygen sealers. The only fix that seems to work for this is: 1. Remove all oxygen sealers (disabling seal WILL NOT WORK) 2. Open a hole in your previously sealed space (I did a 1x2) 3. Placing thermal expansion items. 4. Fix hole. 5. Replace oxygen sealers and re-initiate. I hope this helps someone as we lost many items trying to figure out what was going on, additionally if anyone has a better fix I would love to hear it as I couldn't find any pertinent information by searching here on the web in general.
×
×
  • Create New...