Tekkit Classic Crop Matron

Discussion in 'Tekkit Classic Discussion' started by 540howdy, Aug 22, 2012.

  1. So, how do you power it?
    i've tried connecting copper cables to a BAT box, a solar panel, and a generator
    but no luck


    Help?

    Oh yeah, what's the best use for crop-matrons? How do you use em to their max?
    Last edited by 540howdy, Aug 22, 2012
  2. google is your friend, sometimes you must depend on your friends when you need them, strangers wont help as much.

    they way i have powered it in the past is to have wire's going to its bottom and setting up something like this

    D=dirt
    P=Water with HalfBlock on top(to hide the water)
    C=cropthingy
    DDDPDDD
    DDDPDDD
    DDDPDDD
    PPPCPPP
    DDDPDDD
    DDDPDDD
    DDDPDDD

    and its worked for me...
    not saying its to the max but i like this set up

    quick google search gave me this
  3. I tried google, i couldn't find anything.
    i just need help with the fact that none of the energy suppliers are supplying energy to the crop matrons..

    Your design is fine, but the C in the middle is what I need help with. How do I power that?
  4. just have IC power less than 32EU/t(1EU to power) going to it, with cables, my suggestion is get an EU reader and see if power is flowing
  5. I had a generator connecting to them, but it didn't seem like power was flowing. I'll try the EU reader though. Is the lightning bolt in the crop matron supposed to be flowing?
  6. it should be just like any other ic machine, slowly (or fast) fills and depletes.

    other than that, i recommend useing the EU reader and trying to debug it.
  7. I had a battery box right on top of it facing down, then 30ish tin cables with 5 wind mills at the top. worked great.
  8. I know how to power it easily. Put down a Generator 2 blocks away from your Crop-Matron, connect it with any Cable, and put Coal in the Generator. =|:3

Share This Page