Jump to content

Recommended Posts

My new custom modpack isn't loading. It opened as vanilla at the beginning but after that I looked it up on here and found that I need to delete a few files in the different .jar folders. Most of the mods on my pack are from different packs that are compatible with 1.6.4. The ones that aren't I downloaded the safer/recommended 1.6.4 versions of each so that it would be more likely to run properly.

 

After I deleted the files mentioned I tried running it again. It didn't run vanilla anymore, it just didn't bother and sent me back to pack selection. After I did all I found I was supposed to do, I decided to upload that as the new version to avoid being told to do things I already did, and labeled it as the 1.1a version.

 

My pack is http://www.technicpack.net/modpack/details/asdfmovie-99.535031

and here is the report from my latest crash:

https://copy.com/m9NsA4E2Gi4VCcNL

Edited by YouSmellLikeAGypsy
Link to post
Share on other sites
  • Forum Administrators

It is opening.... vanilla minecraft.

 

Your pack is in a directory called "Pack". This is wrong. Prepare the directories and zip them together (bin, mods and config).

Delete all directories from your mods directory. Leave only the 1.6.4 folder with contents.

The bin directory should only have the modpack.jar file. Delete the rest.

 

After all this I'll take a look again at the pack and one more thing... no configs? This can be catastrophic for a 1.6.4 pack.

 

Edit:

 

I said it will be catastrophic, here are your ID conflicts:

3972: resonant:multiPart from ResonantEngine - aluminumWire from GalacticraftCore
Suggested Ranges: 563-899 (337 IDs), 2856-3119 (264 IDs), 3398-3649 (252 IDs)
Edited by bochen415
Link to post
Share on other sites

 

It is opening.... vanilla minecraft.

 

Your pack is in a directory called "Pack". This is wrong. Prepare the directories and zip them together (bin, mods and config).

Delete all directories from your mods directory. Leave only the 1.6.4 folder with contents.

The bin directory should only have the modpack.jar file. Delete the rest.

 

After all this I'll take a look again at the pack and one more thing... no configs? This can be catastrophic for a 1.6.4 pack.

 

Edit:

 

I said it will be catastrophic, here are your ID conflicts:

3972: resonant:multiPart from ResonantEngine - aluminumWire from GalacticraftCore
Suggested Ranges: 563-899 (337 IDs), 2856-3119 (264 IDs), 3398-3649 (252 IDs)

I knew it would be something obvious -_- alright, 1.2a is up. Not sure if it works because wifi where I am is too slow to even download it now apparently.

Edited by YouSmellLikeAGypsy
Link to post
Share on other sites
I knew it would be something obvious 
-_- alright, 1.2a is up. Not sure if it works because wifi where I am is too slow to even download it now apparently.

 

 

This is why I use a local forge installation through the vanilla launcher to do my testing in, when its ready I can just zip it up and update the modpack info so its ready. No need to download the modpack and try it over and over again this way as its time consuming to just download it, let alone updating it, uploading the changes, then re-downloading the changes to see them.

Link to post
Share on other sites
  • Forum Administrators

I knew it would be something obvious [-_-] alright, 1.2a is up. Not sure if it works because wifi where I am is too slow to even download it now apparently.

 

It's working... kinda..... Loads vanilla again.

 

 

1. The bin directory should only have the modpack.jar file. Not minecraft.jar

2. Your mods/1.6.4 directory contains two CodeChickenLib versions. Remove codechickenlib-universal-1.6.4-1.0.0.62.jar as the other file is requested by other mods.

3. Your mods directory contains one more MacOS specific file (.DS_Store). Remove it.

4. [WARNING] [ForgeModLoader] The copy of Mad Science that you are running is a development version of the mod, and as such may be unstable and/or incomplete.

5. Where did you get development versions of Resonant Induction? You should be searching here

6. [ForgeModLoader] The mod GalacticraftMars has attempted to register an entity ID 171 which is already reserved. This could cause severe problems

7. Where did you get ICBM development version? You should be here in the stable section.

8. Some mods are not in the newest/best/most stable version. Check minecraftforum, curse.com and authors sites for information.

9. Names of some files suggest you didn't get them from official sources mentioned in 8. This is dangerous and can lead to a security breach. Fix it.

Link to post
Share on other sites
  • Forum Administrators

This is why I use a local forge installation through the vanilla launcher to do my testing in, when its ready I can just zip it up and update the modpack info so its ready. No need to download the modpack and try it over and over again this way as its time consuming to just download it, let alone updating it, uploading the changes, then re-downloading the changes to see them.

 

Agree. This is the best testing area. I strongly advise using also MultiMC and plowmanplows BareBonesPack

Link to post
Share on other sites
  • Forum Administrators

Is there a video or something explaining what you said before because I'm not even sure I'm trying to read English anymore.

 

You need to walk away and come back tomorrow. Take note that the only critical error you made is number 1. After fixing this the pack will load as a modded minecraft :)

Link to post
Share on other sites

Because you deleted the modpack.jar, you also moved all mods from the mods directory to the 1.6.4 directory inside mods.

Take a step back. The previous version was better.

K only problem is with forgemultipart if you know about that. For my modpack I need 1.0.0.244 or higher, so I got 1.0.0.250. After that, it told me that it was conflicting with 1.0.0.227. So I deleted it and put .250 in its place. After that, it made a new .227 and continued to whine that it was conflicting with .250. You know how to change that?
Link to post
Share on other sites
  • Discord Moderator

Forge Multipart goes in your mods<MCVERSION> folder, where <MCVERSION> is the version number of MC you are using. For 1.6.4 it would be mods1.6.4. Delete all your current Forge Multipart JAR files and download the latest version for 1.6.4 from here: http://files.minecraftforge.net/ForgeMultipart//index_legacy.html

Link to post
Share on other sites

Forge Multipart goes in your mods<MCVERSION> folder, where <MCVERSION> is the version number of MC you are using. For 1.6.4 it would be mods1.6.4. Delete all your current Forge Multipart JAR files and download the latest version for 1.6.4 from here: http://files.minecraftforge.net/ForgeMultipart//index_legacy.html

I did, but it always downloads a different version when I start it up and then whines that there's more than one of that type of file.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By mojiwoji
      I'm pretty sure this will be an easy fix. FML starts working, then it finishes. Screen turns white, then red, then black. After that, it crashes. Here is the info...
       
       
      crash-2020-08-30_20.55.33-client.txt
    • By aron9forever
      Hello, so i have been building on my tekkit classic map and while i was building, minecraft crashed with "Saving Chunks" screen. When i went to rejoin, it said "Simulating the world for a bit.." and after that "Saving chunks" and white screen.
      My techniclauncher log:
      https://privatebin.net/?e3752af48fe736a1#873mR1KLxx8hPqXt
      ______
      I FIXED IT! THE ISSUE WAS THAT I HAD SOME BROKEN ENERGY TELEPORTERS!
      if i remember correctly, i made this before the game crashed. https://prnt.sc/tk5lq4
    • By terminatorztc
      So I'm not really sure what even happened all I know is that I tired to run Tekxit 3 LE Official. When it didn't run a tested multiple other packs including Attack of the B-Team, Blightfall, Tekkit, ect. None have been able to even open. The launcher flickers then almost resets like it never was launching in the first place. I tried reinstalling the pack and launcher, even a complete check on my PC. Specs have nothing to do with it I have 12gb of RAM also nothing should be conflicting with the program. I'm honestly at a loss for words as this is nothing like I've ever seen. I've tried just about everything reinstalling Java was something I tested but to no avail. I tried researching my problems hoping someone had the same issues but I only find outdated sources and after updates I dont trust their solutions. It may also be well to inform everyone that the modpack did initially work but i tired downloading another modpack which was RLCraft but that didnt open and now im here(I now only have Tekxit installed and still wont run).
       
      Edit: Almost forgot crashes when "installing minecraft assets"
    • By PyroSweets
      My friends and I made a custom modpack with all our favorite mods in 1.12.2. I was having some issues with the modpack.jar that made it run vanilla and I fixed it, but now the modpack doesn't even show a java client or loading screen before crashing. I posted a day or two ago on reddit and was told to delete some iffy modpacks, but that only makes it run vanilla again. Any ideas why this is happening?
      Crash Log: http://dl.dropboxusercontent.com/s/wkv06mn3wna9hbv/techniclauncher_2020-05-31.log
      Modpack: http://dl.dropboxusercontent.com/s/ndyuw1g8t38xkde/POGWORK.zip
      Technic Page: https://www.technicpack.net/modpack/dillons-cult-pack.1697994
    • By Insomniac07
      bumped computer power button while playing now technic wont load worlds then after closing modpack wont load that modpack. i know i need to put my logs in pastebin but don't know how pls help
×
×
  • Create New...