Cr4zy_M0nk3y Posted June 3, 2013 Share Posted June 3, 2013 I know its still in its testing phase. But just out of curiosity. Would anyone know a rough estimated time for when they would release a server version? I'm eager to run a 1.5.2. Tekkit server lol. And yes, I have searched around a little bit trying to find the answer before posting. I haven't been able to find anything :\ Link to comment Share on other sites More sharing options...
Discord Moderator plowmanplow Posted June 4, 2013 Discord Moderator Share Posted June 4, 2013 Both the client and server are available. The server seems to be running error free so far with moderate testing on an existing SMP world and using the latest MCPC+ (build 510). Link to comment Share on other sites More sharing options...
Cr4zy_M0nk3y Posted June 4, 2013 Author Share Posted June 4, 2013 This is probably a very stupid question.. But, where could I get the server download? I go to technic's main page and all I see is 1.0.6. I can't find builds or anything on it. And thank you so much for the response! A week ago I was pulling hair out downloading false files to get one to run and ultimately had to redo my server while losing a ton of stuff. My own fault for not backing it up though. I should also add, that this isn't a huge server or major server. Its only running for 2 of us. I have it running through the tekkit download for a server. Not sure if that will make a difference or not. Link to comment Share on other sites More sharing options...
Discord Moderator plowmanplow Posted June 4, 2013 Discord Moderator Share Posted June 4, 2013 Just "copy link/shortcut" for the 1.0.6 download and change the 1.0.6 to 1.1.0 Link to comment Share on other sites More sharing options...
Cr4zy_M0nk3y Posted June 4, 2013 Author Share Posted June 4, 2013 Just "copy link/shortcut" for the 1.0.6 download and change the 1.0.6 to 1.1.0 Thank you sir. It is much appreciated! Link to comment Share on other sites More sharing options...
Dash16 Posted June 4, 2013 Share Posted June 4, 2013 The server version 1.1.0 seems to have an incorrect version of minecraft_server.jar packaged with it, getting a severe FML error on launch. Is part of running mcpc+ replacing this file? I was able to start a server after downloading the correct server jar from minecraft.net Link to comment Share on other sites More sharing options...
gigafunk Posted June 4, 2013 Share Posted June 4, 2013 Yes, you get rid of the server jar and mcpc is your new server jar. Link to comment Share on other sites More sharing options...
Cr4zy_M0nk3y Posted June 4, 2013 Author Share Posted June 4, 2013 Glad to know this now. I won't be doing any server setup's till hopefully Thursday if I have off. I'm eager to get a 1.5.2 running. And hopefully getting some working mods also. Does anyone know if the Aether Super + pack works with 1.5.2? I'm curious with that one. Link to comment Share on other sites More sharing options...
chjade84 Posted June 6, 2013 Share Posted June 6, 2013 I've tried up update my tekkit server to 1.1.0 and also keep my 1.0.6 world but get some mod errors and lots of flashing chunks in the game. Is there a way to bring a world from 1.0.6 to 1.1.0? Link to comment Share on other sites More sharing options...
Dash16 Posted June 6, 2013 Share Posted June 6, 2013 Did you update your client? You have to click the gear on the modpack, manually select a build, then choose 1.1.0. Link to comment Share on other sites More sharing options...
Discord Moderator plowmanplow Posted June 6, 2013 Discord Moderator Share Posted June 6, 2013 chjade84: You should just be able to use your old world in the 1.1.0 version. There were no ID changes (just a few additions) so everything should work just as it was before. Link to comment Share on other sites More sharing options...
chjade84 Posted June 6, 2013 Share Posted June 6, 2013 Well this is weird... Now it seems like it's mostly just fine... I was getting many errors like "[iNFO] [buildCraft] This world was saved with mod CompactSolars version 3.2.0.21 and it is now at version 3.2.3.23, things may not work well" (That error is just made up but there seemed to be several dozen of them for all different mods) along with a huge wall of text I didn't even bother to read. I restarted the server several times and eventually gave up. Now I restarted to copy the errors for you guys and the errors aren't there. I still get flashes of see-through chunks sometimes but it's a lot better then it was. Link to comment Share on other sites More sharing options...
Discord Moderator plowmanplow Posted June 6, 2013 Discord Moderator Share Posted June 6, 2013 That does happen when you upgrade just as a "you have upgraded and things might not work as expected. Link to comment Share on other sites More sharing options...
chjade84 Posted June 6, 2013 Share Posted June 6, 2013 Well now I have new problems... I get home and go through these steps on my home computer and Minecraft crashes... java.lang.IllegalArgumentException: Slot 700 is already occupied by powercrystals.minefactoryreloaded.block.BlockFactoryFluid@608a8b80 when adding bau5.mods.projectbench.common.ProjectBenchBlock@27ccb204 at net.minecraft.block.Block.<init>(Block.java:340) .... No idea what's up - I just can't install 1.1.0. I started with no .technic folder and right off the bat installed 1.1.0 - crash I started with no .technic folder and installed 1.0.6 - works fine I upgraded 1.0.6 to 1.1.0 and I get the crash again. Both computers running Win 8 x64 with 64 bit Java. I tried again at work (remote desktop) fresh install straight to 1.1.0 and I get the crash or a dialog "Error retrieving information for selected pack: Tekkit" So I try 1.0.6 from a fresh install and it works. Upgrade 1.0.6 to 1.1.0 and I get a crash again. Vec3 Pool Size: ~~ERROR~~ NullPointerException: null java.lang.IllegalArgumentException: Slot 700 is already occupied by powercrystals.minefactoryreloaded.block.BlockFactoryFluid@617e1c7c when adding bau5.mods.projectbench.common.ProjectBenchBlock@1e8042e5 No idea where to go from here Link to comment Share on other sites More sharing options...
nemmeh Posted June 7, 2013 Share Posted June 7, 2013 We updated to 1.1.0 and ran into a slew of issues aswell. I played with it for 5 minutes then decided to scratch install. I ended up backing up the server.properties file and world folder and then scrapped everything else before installing the new version (this is on linux mind you). Also the client needed to be completely deleted and then reinstalled as everyone was getting the same white screen startup hang. Just my experience, may not resolve or relate to your own issues. Link to comment Share on other sites More sharing options...
Fuzzy-Wuzzy Posted June 8, 2013 Share Posted June 8, 2013 Well now I have new problems... I get home and go through these steps on my home computer and Minecraft crashes... java.lang.IllegalArgumentException: Slot 700 is already occupied by powercrystals.minefactoryreloaded.block.BlockFactoryFluid@608a8b80 when adding bau5.mods.projectbench.common.ProjectBenchBlock@27ccb204 at net.minecraft.block.Block.<init>(Block.java:340) .... No idea what's up - I just can't install 1.1.0. I started with no .technic folder and right off the bat installed 1.1.0 - crash I started with no .technic folder and installed 1.0.6 - works fine I upgraded 1.0.6 to 1.1.0 and I get the crash again. Both computers running Win 8 x64 with 64 bit Java. I tried again at work (remote desktop) fresh install straight to 1.1.0 and I get the crash or a dialog "Error retrieving information for selected pack: Tekkit" So I try 1.0.6 from a fresh install and it works. Upgrade 1.0.6 to 1.1.0 and I get a crash again. Vec3 Pool Size: ~~ERROR~~ NullPointerException: null java.lang.IllegalArgumentException: Slot 700 is already occupied by powercrystals.minefactoryreloaded.block.BlockFactoryFluid@617e1c7c when adding bau5.mods.projectbench.common.ProjectBenchBlock@1e8042e5 No idea where to go from here We are getting the same thing! =/... did you ever figure out how to get the client to work? we have tried completely deleting ALL technic files in the /roaming folder even... Link to comment Share on other sites More sharing options...
Fuzzy-Wuzzy Posted June 8, 2013 Share Posted June 8, 2013 We are getting the same thing! =/... did you ever figure out how to get the client to work? we have tried completely deleting ALL technic files in the /roaming folder even... I ended up fixing the block ID error by going to C:Users(username)AppDataRoaming.tekkittekkitmainconfigbau5_ProjectBench.cfg and changing the block ID to something crazy high like 3333 so it wouldnt conflict with any other blocks in other mods. 1.1.0 opens just fine after that. We also had to update the server mystcraft mod and bspkrscore to match the new client mods. and had to disable the project bench mod on the client to get everything to work.. MESSY! Link to comment Share on other sites More sharing options...
Aedaric Posted June 8, 2013 Share Posted June 8, 2013 So I just downloaded 1.1.0 for the server and like the earlier post mentioned, the minecraft-server.jar file isn't the right version or something or another. I have an idea of what the MCPC+ thing is, however I don't quite understand what I need to download from there to set up my server. I apologize as I am fairly new to this and am probably doing a very newb thing anyway. Link to comment Share on other sites More sharing options...
Aedaric Posted June 8, 2013 Share Posted June 8, 2013 Okay, I think I fixed it, but for whatever reason, the launcher won't start the 1.1 version, = ( Link to comment Share on other sites More sharing options...
Fuzzy-Wuzzy Posted June 8, 2013 Share Posted June 8, 2013 Okay, I think I fixed it, but for whatever reason, the launcher won't start the 1.1 version, = ( use the "gear" underneath the Tekkit button on the far left.. and tell it to let you to manually choose version. Link to comment Share on other sites More sharing options...
Aedaric Posted June 8, 2013 Share Posted June 8, 2013 Oh I did, however, that is the version which is crashing immediately after the MOJANG. One person reported it in the bug area, but if others have gotten it to work, perhaps I can too. Link to comment Share on other sites More sharing options...
chjade84 Posted June 8, 2013 Share Posted June 8, 2013 EDIT: This seems to no longer work. As Dash mentioned below, it seems they are actively changing the 1.1.0 pack. I followed the same steps I used successfully below hours later and got new errors. Sorry. I think I got it... finally. Disclaimer: I've had a few beers trying to get this to work so... keep that in mind Server: Download the 1.1.0 server from http://mirror.technicpack.net/Technic/servers/tekkitmain/Tekkit_Server_v1.1.0.zip and get it all extracted somewhere Replace the minecraft_server.jar with the minecraft_server.jar from here https://s3.amazonaws.com/MinecraftDownload/launcher/minecraft_server.jar I think that's all that's needed for the server. Client: Delete the .technic folder and .minecraft folders in AppData\Roaming Open the Tekkit launcher and click the gear in the top right and change the memory to 4GB (optional step?) Save and restart the launcher Click the gear under Tekkit and change the version to 1.1.0 Login and download everything. When Minecraft crashes, close it. open the .technic folder and go to the "coremods" folder - delete CustomPortForge.jar go to .technic\tekkitmain\config and open bau5_ProjectBench.cfg and change the block { I:"Project Bench"=700 } to block { I:"Project Bench"=3333 } Open the "mods" folder and delete the the 'bspkrsCore', 'EnderStorage', 'mystcraft' and 'OmniTools' mods. These are out of date from the 1.1.0 server. Replace those mods with the versions that came with the server, found in the server's 'mods' folder. I just got myself and a friend running on my 1.5.2 server so I think this works. Good luck! If you want to enable optifine/shaders mods, delete the EnderStorage,jar from the server and clients 'mods' folder. Something about it makes those other mods unhappy. Link to comment Share on other sites More sharing options...
Dash16 Posted June 9, 2013 Share Posted June 9, 2013 Uh, they are clearly adding new stuff to the 1.1.0 build, I now see Mekanism and Atomic Science modpacks in /mods. Those weren't in there a few days ago. Thanks for the tips, might need to update my 1.1.0 server. Link to comment Share on other sites More sharing options...
Watson_777 Posted June 9, 2013 Share Posted June 9, 2013 chjade84, to get the client working, all I had to do was change block { I:"Project Bench"=4094 } to block { I:"Project Bench"=3333 } Also, unless I'm very much mistaken, .minecraft has absolutely nothing to do with a default Tekkit install. So deleting it will change nothing. Link to comment Share on other sites More sharing options...
edorta Posted June 9, 2013 Share Posted June 9, 2013 chjade84, I think we'd better wait. I really need to update only galacticraft because in the tekkit 1.0.6 version does not work the sealant. I use google translator, sorry my English. I think they are constantly updating the client, because I've done what you said and get a sign that says other mods have not been updated on the client. - NetherOres, minefactory. I've solved by copying them from the server. - Ee3: The client version: EE3-pre1h-TechnicFix.zip The server versión: ee3-universal-pre1h-16.jar - It also came two more mods have not been updated, in the 2 put the word power. I do not remember now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now