Archived

This topic is now archived and is closed to further replies.

BalrogLP

Cant produce Antimatter/Deuterium

Recommended Posts

Hi guys ,

i have a problem with my voltz.

i want to make anitmatter but it dont work. i have built a 30 x 30 circle with electromagnets but the particle accelerator dont produce antimatter.

Note : i use the latest voltz version

2nd problem : i want to build a fusion reactor but there is no deuterium extractor .

if anyone know how i can make anitmatter and deuterium pls write a comment .

Share this post


Link to post
Share on other sites

For the antimatter I do not know, it needs to be a square where the walls are hollow internally,

particle accelerator needs something to accelerate like cobblestone,

needs to be switched on and needs empty cells to capture any antimatter that appears.

(at least until recently)

For the fusion reactor at least until recently one used a chemical extractor and fed it energy and water to get deuterium.

Share this post


Link to post
Share on other sites

  • Similar Content

    • By Tassyr
      So I recently reinstalled this modpack (And minecraft, for that matter) And promptly went to mars to set up a base. But I needed power. So I decided to set up a grid of fusion reactors; four of them.
       
      And since cells are cheap and turning them from empty cells to deuterium just takes power and water, I figured I'd mass produce empty cells, fire 'em up with me, and use buildcraft to feed them into the chemical extractors and then from there to the reactors. 
       
      Thing is, I KNOW I did this once before but I can't remember how; how do I make the BC transport pipes evenly distribute from one input to four outputs? Like say, I have one chest. How do I make it drop one cell into each extractor evenly?