Jump to content

GRANDAD60

Members
  • Posts

    2
  • Joined

  • Last visited

    Never

About GRANDAD60

  • Birthday 01/01/1900

GRANDAD60's Achievements

Dirt

Dirt (1/9)

0

Reputation

  1. Hi folks this is my first post to something like this. I hope you can help. I too have no output from my reactor even though I have removed all cables from the reator there is still no output. I buillt a reactor at the same site without chambers or enclosure and it worked fine powering all 3 transformers, msfu, mfe and battbox. I just do not understand it. PLEASE can anybody help. Halelooya!!!!! Update I fixed it. Here Goes first reactor must be connected to ground, next HVT must be connected and the right way round ( It will run without ) Lastly the MFS must be connected and the right way round and a bit away from the reactor. If all these things are correct it will output to the MFS but strangly I could not get an EU reading at the reactor. I hope this helps somebody. Many Thanks GRANDAD60
×
×
  • Create New...