eanon01

Seems like computers and ccsensors gives me the information I need to keep my reactor running 100% at 2000 EU/t. Programing and testing now :)

DaSoul: Yes but there the EU is sendt in packages of max size 512 ( Its how HV-solar arrays work ) theprolo: Will an item detector be able to tell a computer how many uran cells are in my reactor. And I am using forcefields. I'm currently using alot of the MFFS system to controle the reactor. This sets up the forcefield: http://thetekkit.wikia.com/wiki/Reactor_Containment_Field_Projector Checks the temperature and also sends a signal to shutdown the reactor in case over overheating: http://thetekkit.wikia.com/wiki/MFFS_Reactor_Heat_Monitor_Server and the wireless client that comes with it. And the Reactor Heat Control to cool the reactor down I see that when the reactor have run out of fuel ( no auto refuling ) then about 1/3 is turned into depleted cells. My next issue is trying to read out the content of the reactor inside the chambers. as I said earlier I would like the reactor to bu filled with 46 uran cells and 8 empty slots at all times. Edit theprolo: 4xIns HV cable can carry 2048 EU packets

Theprolo: you got ut! No big reson. But at 2400 EU/t i can pull out all the depleted cells and keep it 100% full of uran. If anyone know how i can keep the reactor with 46 uran cells and 8 empty slots automaticly please share. Btw at 2400 EU/t the reactor is on 50% but at 2000 EU/t i han keep it running 100%. So keeping 8 slots empty is preferred.

I tried: HV Transformer HVC HVC HVC HVC HV Transformer HVC Reactor-HVC This still melted the cable Edit: I also copied your layout Omicron and still fried the cable.

Hm.. But them the EU is split in packages of 512EU/t. If you have one unit producing over 2048 EU/t then 4xhv calbels melts. ( I did that )

Highest stable (100% ) output for me is 2000EU/t but there I have not found any good means of tracing what is inside the reactor... with 2400 the reactor is full of uran cells and nothing more.

Is the any way to handle an output from a reactor that is producing more than 2048EU/t? Max at my reactor is about 2400 EU/t? But then the cabels blows or melts. Anyone managed to do this?