[Handling over 2048 ET/t?]

Seems like computers and ccsensors gives me the information I need to keep my reactor running 100% at 2000 EU/t. Programing and testing now :)

[Handling over 2048 ET/t?]

DaSoul: Yes but there the EU is sendt in packages of max size 512 ( Its how HV-solar arrays work )

theprolo: Will an item detector be able to tell a computer how many uran cells are in my reactor.

And I am using forcefields. I'm currently using alot of the MFFS system to controle the reactor.

This sets up the forcefield:

http://thetekkit.wikia.com/wiki/Reactor_Containment_Field_Projector

Checks the temperature and also sends a signal to shutdown the reactor in case over overheating:

http://thetekkit.wikia.com/wiki/MFFS_Reactor_Heat_Monitor_Server

and the wireless client that comes with it.

And the Reactor Heat Control to cool the reactor down

I see that when the reactor have run out of fuel ( no auto refuling ) then about 1/3 is turned into depleted cells.

My next issue is trying to read out the content of the reactor inside the chambers.

as I said earlier I would like the reactor to bu filled with 46 uran cells and 8 empty slots at all times.

Edit theprolo: 4xIns HV cable can carry 2048 EU packets

[Handling over 2048 ET/t?]

Theprolo: you got ut! No big reson. But at 2400 EU/t i can pull out all the depleted cells and keep it 100% full of uran.

If anyone know how i can keep the reactor with 46 uran cells and 8 empty slots automaticly please share.

Btw at 2400 EU/t the reactor is on 50% but at 2000 EU/t i han keep it running 100%. So keeping 8 slots empty is preferred.

[Handling over 2048 ET/t?]

I tried:

                    HV Transformer

 

        HVC HVC HVC

 

        HVC    HV Transformer

        HVC

Reactor-HVC

 

 

 

This still melted the cable

Edit: I also copied your layout Omicron and still fried the cable.

[Handling over 2048 ET/t?]

Hm.. But them the EU is split in packages of 512EU/t. If you have one unit producing over 2048 EU/t then 4xhv calbels melts. ( I did that )

[Handling over 2048 ET/t?]

Highest stable (100% ) output for me is 2000EU/t but there I have not found any good means of tracing what is inside the reactor... with 2400 the reactor is full of uran cells and nothing more.

[Handling over 2048 ET/t?]

Is the any way to handle an output from a reactor that is producing more than 2048EU/t?

Max at my reactor is about 2400 EU/t? But then the cabels blows or melts. Anyone managed to do this?