Hey guys,
I'm relatively new to all this but I'm hoping someone can help! I have read a few threads but aren't getting very far!
I have a nuclear reactor set-up making my power. It then goes into 2 MFSUs, downscaled to LV and then into an energy link. The energy goes onto a wooden conductive pipe and the a power teleport pipe. I then have 6 "relay stations" each less than 150 blocks apart taking me to my new "base" around 1000 metres/blocks away. Each relay is made up of two power teleporters connected via a gold conductive pipe. Each end of the relay is on a different frequency, one coming from the relay before, one going to next relay station. All receiving pipes are set to true, every pipe is showing as connected to 1 other pipe, there is a teleporter tether at every relay and even some world anchors for good measure (not an anchor at every one, just start and finish!). Power is being drawn by the energy link but it's then not going anywhere.
This set-up works in single player but can't work out why not on my tekkit server! I've checked the server files and the pipes are enabled.
A further bit of info. I have a switch and transmitter at one end of the trail (my new base) and this sends a signal back to a receiver connected to the first energy link to shut it off when it's not needed, to save power. I have also connected a 2nd link at the end to both spur off to a second network and to convert some power back to industrialcraft energy in an MFSU. However, this is irrelevant because the power isn't making it through the first pipe, let alone to the end!!!
Please help!