jag989

+1 for the restarts I do 6 hour restarts on my small server and it seems to work well (2GB RAM, usually no more than 4 online at once).

I'm setting up a tesla coil that relies on an item detection filter, but I've been running in to trouble. Whenever the server restarts, any item I've placed inside the filter is lost. The filter is always empty once the server is running again. I initially thought it was an issue with the chunk unloading, but it I've double and triple checked that this wasn't the case. There is both a dimensional anchor and chunk loader within range of the filter. Is this a known bug, or better yet, is there a workaround to keep the filter from erasing items? Thanks!

Thanks for the ideas so far guys. I'm not able to check the config files at the moment, but those lines are for the phased pipes, correct? I'll also have to check again with an EU reader, but I've been reading the input on the consumer and it does match the ~140 EU. Also, it is actually possible to craft an IC2 EV consumer (it uses an MFSU in place of a transformer), but as you noted, it isn't serving much of a purpose here. This is a good point, but the bridge seems to output 58 MJ/T producer no matter how many quarrys are on the other end. I also added a second MJ producer on the same energy bridge (linked to the same phased pipe) and that did output another 58 MJ/T for 116 total. If I can keep adding more MJ producers it isn't going to be a problem, but it just seems really weird.

I'm using the IC2 EV (extreme voltage) consumer. So far it hasn't been necessary due to the output limitation, though. Both the MFSU and bridge have been remaining fully charged. Also, the numbers I listed above were EU/t and MJ/t. I'll also try with a Tesseract but I'm reading that those do have a hard limit of 100 MJ input each - is there a similar limit for the phased pipe?

I've been having trouble with an energy bridge not outputting as much MJ as I would expect. My setup is below: MFSU -> EV Consumer -> Bridge -> MJ Producer No matter how much power is stored in the MFSU or pumped directly in to the EV consumer, no more 141 EU is consumed and 58 MJ is ever produced. The MJ output is being transported via phased pipes to 6 quarries. Am I doing something wrong or is this the correct behavior? Thanks!