Sulo Hayha

Well, I used buildcraft pipes becouse I like to see the energy moving around Also, with conduits I would need a lot of Cells to collect power with 100 MJ\t limit on cables, with pipes there is no such limit, I can feed whole plant output to one Cell. How did you make pipes transport steam? Or is there new Tekkit version I dont know about?

Stuff I learned about Fusion Reactors and other stuff from this mod: 1. EM Glass does NOT conduct heat 2. EM Glass can be used to shield your base from atomic apocalypse if used as hermetic wall around whole reactor 3. Reactors spit plasma from all 4 SIDES, no plasma output on top and bottom 4. You can use EM Glass to create plasma tunnels 5. Plasma goes ~6 blocks away from reactor at best, when used in bigger tunnel it spreads in sphere 6. There has to be at least one free block in tunnel on same height as reactor for plasma to create 7. Plasma tunnels can be bigger than 1x1, they can also take irregular shapes 8. Large turbines will turn even with just 1/9 water blocks under it generating steam 9. Turbines HAS to sit directly on top of heated water block (or connected to such with steam funnel) to generate power As for reactor setups themselves, there is a lot of those on Voltz forums (and google ) but I've created one of my own. We have no way to calculate its real power without some blocks from Voltz but I've tested it manually. Completly cooled down and fueled reactor is fed power to generate plasma for 4 minutes from external power source, it generates power for those 4 minutes + couple more minutes without using power while water is cooling down and turbines are stopping. After such cycle it produced 4.187.124 MJ. It uses 2 fusion reactors, 21 large turbines and 26 small turbines (not all small turbines were connected at the moment). Screen: