The MFE Unit isn't outputing EU

[BlueEagle0117]

Title: The MFE Unit isn't outputing EU

Version: 3.1.2

OS: Windows 7

Java Version: Java Version 7 u6

Description of Problem:

I put down my MFE and connect it to my windmills. I can see that the energy is storing, but not being outputted. I used the EU-Meter to see if power is getting sent out.

Here's my layout of equipment:

http://dl.dropbox.com/u/43149538/Signature/2012-08-20_09.13.44.png

http://dl.dropbox.com/u/43149538/Signature/2012-08-20_09.14.02.png

http://dl.dropbox.com/u/43149538/Signature/2012-08-20_09.31.24.png

Error Messages:

Error Log:

[bossgx700]

Is the output connected to anything that is drawing power? If not then there will be no output.

Just in case you don't know you will need the output to go into an lv transformer before connecting it to any 'standard' machines. Some machines can take the higher output, however things like furnaces, macerator, extractors can't.

[BlueEagle0117]

Yes the MFE is connected to a LV transformer then to the machines which are empty of power. That's why I'm confused with the lack of output from the MFE

[tanki123]

check for redstone signals emmitting to the lv transformer as it will act like a splitter cable and deny all power flow through the transformer. I encountered this problem very often and have to use cover strips and red alloy wires to get redstone signal past them

[BlueEagle0117]

Thanks the problem got resolved after some rearranging of machines and wires. Thanks