roy7654 Posted July 26, 2013 Posted July 26, 2013 hi, i have made a fusion reactor, it makes plasma, but the turbines fail to spin, sorry in advance for such a nooby question, any help would be very much appreciated Quote
UltimateKane99 Posted July 26, 2013 Posted July 26, 2013 Ouch. Sorry, man, but I've got some bad news for you. Fusion reactors work because the Electromagnet block will cause adjacent water blocks around them (above and to the side, and either source or flowing water) to "boil", which the turbine picks up during the block update, and then spins as a result. However, Electromagnetic glass does not cause the water to boil (this is by design, from what I can tell)), which means that the electromagnetic glass you have on the sides won't spin the turbine. You'll need to replace that Electromagnetic Glass with Electromagnets to get it to work properly. Also, since you're on fusion reactors, you might want to check out this tutorial video. Has an extremely overpowered fusion reactor design, if you're interested. :) Quote
roy7654 Posted July 27, 2013 Author Posted July 27, 2013 thank you very much , i was going crazy trying to figure this out,ill try the more effecient design once i can get more turbines Quote
UltimateKane99 Posted July 27, 2013 Posted July 27, 2013 No problem, and good luck with your design! Also, the tutorial is an overkill design, by the way. It puts out more energy than an infinite battery. XD Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.