Jump to content
  • 0

Rails not working?


Question

Posted

Running tekkit 1.1.4 , vanilla rails aren't craftable (as expected) but none of the railcraft formulas seem to be working either. I've tried quite a few and especially the rolling machine - with no luck.

Can anyone confirm is Railcraft supposed to be working in 1.1.4, and if so are the recipes from the Railcraft wiki correct for within Tekkit? (I'd check the wiki but it seems to be offline)

10 answers to this question

Recommended Posts

  • 0
Posted

I just discovered that if you go to the railcraft wiki page for each of the items you want to make that require, for example, rebar, there are alternate recipes for us folks who don't have the newest version installed. So no Rolling Machines are required. It took a bit of digging to figure that out, though.

  • 0
Posted

I wrote too soon...the railbeds are craftable, but the rails themselves aren't craftable on a standard crafting table, despite what the railcraft wiki says. :(

We are running the most recent 1.1.4 version.

  • 0
Posted

first off you make 26 bricks. Then you make a coke oven (a square off bricks 3x3 without the middleblock). You will know the Oven is complete when the window appears in the middle block on the sides. Then you put coal in the oven and then it takes 3 minutes to complete. When you have the oil you go to you craftingtable and do this:

[] = empty

o = oil

w = wooden slaps

[][][]

[]o[]

www

  • 0
Posted

But how do I build a rolling machine? I need the rolling machine to make rails and the only recipe I can find for the rolling machine doesn't work.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...