NUCLEAR REACTOR COMPLETELY SAFE SETUP

[shpuc]

[shpuc]

2168b556f16b51db3e9ddeafa98e87fb

[CraptainAlmighty]

Not bad. Personally, I try to avoid advanced heat vents (very expensive), rather I use overclocked heat vents surrounded on all 4 sides by component heat vents. That way, I get all 36 cooling from the overclocked vent without it melting. Also, placing uranium cells next to each other increases the amount of EU each cell produces per tick.

Example: http://www.talonfiremage.pwp.blueyonder.co.uk/v3/reactorplanner.html?21p7e3jkoy2n29e0j7anv4uii0kql4spziugdpbnxgcdvvqa1ijijz300fxdn4tf1kv2wm8snki91xc

P.S. I personally find the IC2 Reactor Planner (http://www.talonfiremage.pwp.blueyonder.co.uk/v3/reactorplanner.html) incredibly useful, it tells you everything about your setup that you will ever need to know.

Hope this helps!

[arceus_100lv]

if you want a completely safe starter reactor, use this setup.  it generates the most for a reactor with no chambers as far as i have found.

mk I EC http://www.talonfiremage.pwp.blueyonder.co.uk/v3/reactorplanner.html?21p07vytazednsfxldg29avsmzesfu34r3krzso0t18g60xmvga6q0jxtx2zeqs9tyw56pdf2dlvqbk

 

this setup is completely tilable, and is also safe for full depletion.  all you have to do is copy the top or bottom 3 rows, and then tile it.  the better reactor is after this one though. each tile is mk I EC.

http://www.talonfiremage.pwp.blueyonder.co.uk/v3/reactorplanner.html?21p1hxi38doigawtjf6a8c3k0jtafb4intvt9kq9aybshb1xvosiv4qe7wx3v8113foogano7g0a9s0

 

 

as for best possible, i've found this one to work well for a breeder.  double cells for power, and it re-enriches 3 in a full depletion.  my criteria, by the way, are mark 1 with 0 heat generated over the cooling capacity.

mk I EA++ breeder net loss http://www.talonfiremage.pwp.blueyonder.co.uk/v3/reactorplanner.html?21p7ds7tp7zk08avo967dm5kf9bpc4yv7ztoa2eht4ay4asjl2pry933bsdp18hsm8biyh3ir9arr40

 

 

 

edit: the first design works well, but has no pulse linkage.  it could be better by replacing the advanced vents with overclocked, and adding a few component heat exchangers in the gaps between the uranium sets.  by replacing some heat vents with exchangers and others with overclocked vents, i was able to get another double cell in.  link is here.

mk I EC  http://www.talonfiremage.pwp.blueyonder.co.uk/v3/reactorplanner.html?21p7egebx0tla6p4it00ymnqmxhif1okyuvduvxvz6chrwpjxtd6fngs7m1djiy1tna9qm0wj29b3ls

Edited October 1, 2014 by arceus_100lv