Wafflecakes Posted March 4, 2013 Posted March 4, 2013 So I've made an electrolyzer in Tekkit, and I've put it right besides my MFSU, but when I put a water cell in it, nothing happens. Does anyone know how to solve this? Quote
RalphRoberts Posted March 4, 2013 Posted March 4, 2013 It worked fine for me the few times I tried it, just make sure you have them both facing the right way, and try it with an MFE, IIRC that should work. Quote
Wafflecakes Posted March 5, 2013 Author Posted March 5, 2013 The wiki says it should work with a MFSU too so I don't know what I'm doing wrong really...? Quote
Maxis010 Posted March 5, 2013 Posted March 5, 2013 The wiki says it should work with a MFSU too so I don't know what I'm doing wrong really...? You do know the unique rules around the electrolyzer right? Water Cells are electrolyzed when the attached power storage device exceeds 75% charge at the cost of 15k per cell Electrolyzed Water Cells are discharged back in to regular water cells when the attached power storage device drops below 25% charge at the rate of 13.5k TL;DR If the MFSU doesn't have more than 7.5 mil in EU the electrolyzer won't charge cells Quote
Wafflecakes Posted March 5, 2013 Author Posted March 5, 2013 You do know the unique rules around the electrolyzer right? Water Cells are electrolyzed when the attached power storage device exceeds 75% charge at the cost of 15k per cell Electrolyzed Water Cells are discharged back in to regular water cells when the attached power storage device drops below 25% charge at the rate of 13.5k TL;DR If the MFSU doesn't have more than 7.5 mil in EU the electrolyzer won't charge cells Oh, thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.