Using Buildcraft Teleport Pipes to power Terraformer

[Maccyjam]

Hey,

I have 2 electrical engines hooked up to a MFSU connected to a nuclear reactor and the engines pump electricity into power teleport pipes.

Now I have powered other things with these teleport pipes including a quarry and a recycler however the Terraformer doesn't want to work.

I have got the power receiving pipe connected to a Engine Generator(MV) then that connects to an MFE via a glass fibre cable which then connects to the Terraformer. The MFE doesn't seem to be gaining any power and the Terraformer doesn't seem to work. The pipes are on the correct frequencies and the receiving pipe is set to receive so I do not know why it doesn't want to work. I might add however, that the Terraformer is much further away than the quarry and recyclers were if that has anything to do with it.

Any help would be greatly appreciated.

Thanks in advance,

[OmegaJasam]

If they're far apart, you probably need chunk loader blocks to make sure the chunks stay loaded on each end.

[Maccyjam]

Okay thanks, I'll try that.

Also, I don't suppose if you know if there's a limit to power teleport pipes and if you lose power the further you teleport the electricity?

Thanks again,