Ictoo Posted August 1, 2012 Share Posted August 1, 2012 Hello, im trying to control a door with one Receiver and two transmitters on each side but they don't work the way i want.(my door is two sticky pistons pushing wood blocks) When one transmitter is on the other transmitter cant tell it to stop sending the signal, i just wanted to know if there was away around this? Link to comment Share on other sites More sharing options...
Valkon Posted August 1, 2012 Share Posted August 1, 2012 As long as one transmitter is sending power the receiver will always be on. What you'd want to do is set up an XOR gate, which will send power if it receives one signal but will stop if it receives from both. You would then connect the output of the XOR gate to your transmitter. Link to comment Share on other sites More sharing options...
Ictoo Posted August 1, 2012 Author Share Posted August 1, 2012 Ok i understand that, is there an easy way of doing that with just one receiver and the switches being quite far away? Link to comment Share on other sites More sharing options...
Ictoo Posted August 1, 2012 Author Share Posted August 1, 2012 Ok! i got it thanks Volkon, i just used two receivers with the XOR at the door and its working. Thanks a lot. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now