gravityskills Posted July 21, 2014 Posted July 21, 2014 Recently on my survival world i decided to revert to steam power using charcoal and when i set up my tree farm like i have on FTB the planter would work fine but the harvester wouldn't harvest. The idle isn't going down but its got power.Please help any suggestions are appreciated. Quote
Kalbintion Posted July 21, 2014 Posted July 21, 2014 Make sure theres no redstone signal and theres a valid location for it to spit out items to. If necessary, replace the harvester (break/hammer it, re-place) Quote
Loader Posted July 21, 2014 Posted July 21, 2014 Sometimes they can clog too which can cause this, I like to put a chest behind it and pull out of that rather than put a pipe directly on the harvester, it acts as a buffer which prevents that problem from happening. Quote
o11y_75 Posted July 22, 2014 Posted July 22, 2014 One thing to be aware of is the actual direction the harvester is pointing. Make sure the small hole is facing away from the area you are trying to harvest. You can change it with the crescent hammer. Quote
gravityskills Posted July 22, 2014 Author Posted July 22, 2014 (edited) it has no redstone signal and its pointing the correct way,however it doesn't have a chest behind it just a itemduct.If you read i played FTB i know what I'm doing it just doesn't work on attack of the b-team. Edited July 22, 2014 by gravityskills Quote
Kalbintion Posted July 22, 2014 Posted July 22, 2014 Using a duct can act as an invalid location to output to, use a chest, see if it works. Quote
gravityskills Posted July 25, 2014 Author Posted July 25, 2014 it works with a duct the problem is it won't harvest it outputs fine it just won't harvest the trees. Quote
Kalbintion Posted July 25, 2014 Posted July 25, 2014 There are some trees it may not recognize properly (Slimy trees for example) - what trees isnt it recognizing? And did you check with a precision sledgehammer to see if the tree is in its radius? Quote
Phlexor Posted July 25, 2014 Posted July 25, 2014 Did you use a crescent hammer to change the itemduct connected to the harvester from output to input? Quote
Loader Posted July 26, 2014 Posted July 26, 2014 it works with a duct the problem is it won't harvest it outputs fine it just won't harvest the trees. This is exactly what it does if the duct clogs, for the record, you shouldn't rule it out just on that (if the duct clogs it chops one tree, some goes into the duct, then it jams and stops doing anything. The idle timer bounces at the bottom). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.