Kotja Posted October 27, 2013 Share Posted October 27, 2013 Can I with dome sphere, camouflage and stabilizer build building, that would be completely filled with oxygen bubble? Link to comment Share on other sites More sharing options...
phazeonphoenix Posted October 27, 2013 Share Posted October 27, 2013 Problem with oxygen sealers even without the fact they're bugged is that the larger the room, the more oxygen is needed to seal it. There's a limit as to how large of a room you can seal. I personally had trouble with a 10 x 10 x 5 sized room let alone a complex dome shape. If you're determined to use the dome motif build them as gardens where you plant your trees and wheat with Oxygen Collectors piping to the other rooms of the station. Link to comment Share on other sites More sharing options...
Kotja Posted October 27, 2013 Author Share Posted October 27, 2013 I want use http://wiki.technicpack.net/Oxygen_Bubble_Distributor It makes always sphere even without building. I just make largest building, that oxygen bubble "fills" so i can move in it without oxygen gear. Link to comment Share on other sites More sharing options...
phazeonphoenix Posted October 27, 2013 Share Posted October 27, 2013 Using a bubble distributor to fill in a room sized just right for it's dimensions will work but there still would be some pockets without air and you'd still need a oxygen tank setup as backup. It's not the same as a sealed room with oxygen inside. Link to comment Share on other sites More sharing options...
Kotja Posted October 27, 2013 Author Share Posted October 27, 2013 And what if i make it one block smaller? Link to comment Share on other sites More sharing options...
phazeonphoenix Posted October 28, 2013 Share Posted October 28, 2013 You'll have the same situation. Yes, you'll have oxygen covering the area but it wouldn't be "sealable" by the standards of the Oxygen Sealer which is first of all bugged but also space dependent. you'd have to use air locks leading into the dome so the corridors connected to them could be sealed but that dome area wouldn't be sealable as far as I know. Link to comment Share on other sites More sharing options...
Kalthas Posted October 31, 2013 Share Posted October 31, 2013 lol he doesn't want to "seal" it, he want's to use a bubble. Yes it is possible. You will want to set up your bubble and your force field and then offset the forcefield dome the correct number of blocks so that it coincides with the center of your oxygen bubble. From what I understand about what you are trying to do you should have complete mobility within your house and won't suffocate. That being said it might take quite a lot of power.... but that's part of the fun right? :) Link to comment Share on other sites More sharing options...
Kotja Posted October 31, 2013 Author Share Posted October 31, 2013 I want build the dome using camouflage and stabilizer to build the shape, then remove force field projector. Then I modify the shape (Doors, windows, floor, blocks with oxygen pipe, ...) , then maybe save it as custom field and place oxygen bubble distributor. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now