Maccyjam Posted April 14, 2012 Share Posted April 14, 2012 Hey, I'm trying to power a pump quite a way away from my reactor and want to transport power to it. I've set 'powerloss' in the additional pipes config to 0 to see if that would affect anything. Is there a range as to how far conductive teleport pipes can teleport power? Thanks in advance, Quote Link to comment Share on other sites More sharing options...
Pilchard123 Posted April 14, 2012 Share Posted April 14, 2012 I think you need to set it to 1, not 0. IIRC, 0 will lose 100% of the power per block, but I'm not certain. Quote Link to comment Share on other sites More sharing options...
Maccyjam Posted April 14, 2012 Author Share Posted April 14, 2012 Ohhh, damn. But other devices in a closer vicinity are working? Quote Link to comment Share on other sites More sharing options...
Pilchard123 Posted April 14, 2012 Share Posted April 14, 2012 Dunno, sorry. I don't use power teleport pipes, so I can't really say. Quote Link to comment Share on other sites More sharing options...
OmegaJasam Posted April 14, 2012 Share Posted April 14, 2012 Well, presuming the config works (the pipes losing 0.05% per block between ruined my last setup) Make sure you have chunk loaders on both sides, making sure it coveres the entire system (power will get stuck if the source/destination/any pipes between are not loaded) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.