TheMoistedDonut Posted July 14, 2014 Posted July 14, 2014 I have made this before and it worked. I cant seem to get my output chest to work. It will not take away on the items unless there is one of the items in storage already. Any ideas what im doing wrong. Quote
StratusNightstar Posted July 14, 2014 Posted July 14, 2014 First thought it sounds like your storage is full. Quote
Melfice Posted July 14, 2014 Posted July 14, 2014 Can you describe, in detail, how your system is set up? What kinds of pipes, what types of chips, etc.? Kalbintion 1 Quote
DanielUSA Posted July 14, 2014 Posted July 14, 2014 Make sure you are using the pipes correctly. Because one little thing will cause the system to bug. Quote
Kalbintion Posted July 15, 2014 Posted July 15, 2014 No details of setup, no reference images, no nothing. What do you get when you add that up? Nothing. Pretty much what we can do to help you with the info you gave us. As Melfice said, provide detailed information on the setup, images of the setup help too, make careful note of the yellow markers on the pipes btw when you go to describe it as those markers indicate where the pipe is pointing into for its input/output Quote
pirahnah3 Posted July 15, 2014 Posted July 15, 2014 Did you make dynamic responder chips? (The ones with the orange AND cyan illuminar in them? If you did there is the problem They will not add anything new to a chest, only what is already in them. I learned that the hard way as well. Thankfully I have since made a ton of deep storage and was able to use them there. Quote
DanielUSA Posted July 15, 2014 Posted July 15, 2014 I know if you have junction pipes in the wrong area the items will bounce away when they get there instead of continue going through. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.