Crusader66108 Posted July 21, 2012 Posted July 21, 2012 thanks, really big files. im surprised that the site let you host them. most sites draw a line at 100mb ahh thats much better, I can actually read the starting message on the monitors now .
zagrom Posted July 21, 2012 Author Posted July 21, 2012 Cool, glad there good enough for you. I hope you can learn from them =D
Crusader66108 Posted July 21, 2012 Posted July 21, 2012 ohh how i've learned. i used to be just an industrialcraft2 and Buildcraft expert but now i have knowledge of REDPOWER! . I really hope you guys continue to make things like this and teach us how.
zagrom Posted July 21, 2012 Author Posted July 21, 2012 That is in-fact the plan. Tey wont all be BID builds like this elevator. Ie. I posted this the other day if you hadn't yet seen. The Thread I'm Referring To
beewyka819 Posted July 21, 2012 Posted July 21, 2012 Most likely the cause of your problem based on that description is an uncovered frame somewhere that is getting stuck on something. Or as zag said a wiring issue somewhere Remember to keep testing your build throughout so that you don't get too far ahead of a problem that you may have created earlier. Btw the only thing that was left out in between the vids that I can recall was we were missing a piece of bundle that was replaced, though I admittedly missed some more that we had found at the end during the vid anyways lol. Actually all frames were covered and the wires looked the same. hm... also maybe it only works on servers because i was on singleplayer.
beewyka819 Posted July 21, 2012 Posted July 21, 2012 What parts are you saying I left out? Not to point fingers but I'm forced to assume your wiring isn't properly setup somewhere. There are a few parts of this build that are variables, as in it wont be the same for everyone depending on how your whole building is set up. I dont quite understand what you mean. I might try if I understood. By self building elevator I mean... (well check out a self building house on youtube and you'll get the idea) basicly it looks like a normal landscape then with a flick of a switch the landscape opens up and an elevator comes out of the ground.
bmendez0415 Posted August 3, 2012 Posted August 3, 2012 Is there any way to make the elevator start at the top and go down? Like a basement type thing with the emergency call button going to the ground floor instead of to the lowest basement floor.
zagrom Posted August 4, 2012 Author Posted August 4, 2012 Sorry for not really replying, been pretty focused on the server lately, sorta prepping for the new era. I may look into the self building elevator some more. That could be neat. Is there any way to make the elevator start at the top and go down? Like a basement type thing with the emergency call button going to the ground floor instead of to the lowest basement floor. Theres no reason why not, so long as you change the wiring to do so. If I understand right the only real difference would be to switch out the emergency button to cycle the up wire rather then the down.
N0vaGam3r Posted August 7, 2012 Posted August 7, 2012 Is there a way to do this with the logic but use computercraft via wireless modem to select the floors? This shoud be possible if you make a program for each floor.
Professor_Seb Posted September 9, 2012 Posted September 9, 2012 how many floors? i have made a 7 floor cobble stone maker that has 102 block breakers on each floor so i need a massive elevator, will this cover it?
zagrom Posted October 6, 2012 Author Posted October 6, 2012 Just a bit of update news on both the elevator and bore. Elevator has had some minor design changes that has once again shrunk its size a bit. Also another staff member has designed a CC elevator that I may release. Both of these will get a short video sometime in the future. Those of you still waiting for the bore video, I was planning to do it soon (Its changed designs at least 2 times sense I said id record) but dev is planning to work on yet another new design soon, Ill probably record showoff videos of both but will make a tutorial of whichever people are more interested in at the will be pretty different from each other. Thanks to everyone who has been watching these videos and learning from them. Heres a video response someone sent in to me where he had recreated our elevator design. Show him a little love for taking the time to make a video, I think he did a pretty fine job.
devryb Posted July 26, 2013 Posted July 26, 2013 I updated this with the current mods available in MC 1.5.2 Huge kudos to these mods! Redstone in Motion Minefactory Reloaded The amount of space required for the logic portion as compared to the version from MC1.2.5 is just mind boggling. http://www.twitch.tv/devryb/b/436323274
Lethosos Posted July 26, 2013 Posted July 26, 2013 Psst... Look up "RedLogic" by Immiblis. That being said, RedNet cabling has its own brand of flexibility.
devryb Posted July 26, 2013 Posted July 26, 2013 Yes I know that mod exists The idea was to make it as compact as possible without cc, and really I don't think cc can get much more compact then that. I think you would agree that this is much more appealing over the sea of redstone logic.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now