Msfu not emitting power

[sothatsit]

it seems that my msfu is not emitting power i have tryed using an eu reader but it is reading 0 i have an msfu -> mv transformer -> energy link -> quarry

the msfu is facing the right way

[Dijego]

MFSU -> MV Transformer -> (MV capable wire) -> Energy Link -> Wooden Conductive Pipe -> Conductive Pipe ->Quarry

Not sure if the extra MV wire and extra conductive pipe is required, but make sure you add a wooden conductive pipe to the Energy Link before attaching it to the quarry.

[LUCer]

A screenshot would help a lot, so we can see if something's wrong.

[sothatsit]

Screenshots - i know the wires are connected

[Valkon]

On your MV transformer, do you have the energy from the MFSU going into the three-dotted side or the one-dotted side? I can't tell from the picture.

[sothatsit]

its going into the 3 dotted side

[Made_You_Look]

3-dotted is output.

[sothatsit]

no it is not 3 dotted is where my 512 eu/t goes in and 128 eu/t comes out i read the wiki

[Made_You_Look]

Oh right, I was thinking of the MFSU, output is the marked one. My bad lol.

[Xylord]

You might want to know that the energy link can be placed directly aside the quarry, and it'll still work. I think the conductive wooden pipe does have a loss of energy, so you'd have a slightly better performance.

[Sol_Rokks_Teddy]

why not just have the msfu connected directly to to the energy link and forget about the mv transformer? Or does that waste power somehow?

[Torezu]

Actually, what you really want, so as not to waste power, is an LV trans to a batbox to the energy link next to the quarry. Energy links will burn all the energy you're willing to give them, and throttling your power output with a batbox will let the quarry run at full speed without burning an extra, oh, 480 EU/tick for no reason.