tim condron Posted May 4, 2013 Share Posted May 4, 2013 so redstone energy conduits are bugged now in that you cannot change which direction they try to flow energy through. this makes using redstone energy cells very hard to do as you have to place machines adjacent to the cell. if anyone can think of a way to transport power from a cell without using the conduits please post it here. Link to comment Share on other sites More sharing options...
Valkon Posted May 4, 2013 Share Posted May 4, 2013 How are you trying to change the way in which they flow? I can change them fine, perhaps you are doing it wrong. Link to comment Share on other sites More sharing options...
tim condron Posted May 4, 2013 Author Share Posted May 4, 2013 ok so on my server i try to right click on the conduits with a crescent hammer to change the arrow's direction, however everytime i try to it boots me from my server saying "internal server error" Link to comment Share on other sites More sharing options...
tim condron Posted May 4, 2013 Author Share Posted May 4, 2013 just tested it on a single player non server world and it appears to work fine, is it possibly a server issue? Link to comment Share on other sites More sharing options...
tim condron Posted May 4, 2013 Author Share Posted May 4, 2013 annnd here is the server side error report from MFL "A critical server error occured handling a packet, kicking 507743 java.lang.RuntimeException: MicroblockSupporterTransformer cannot be used on blocks with multiple selection boxes. Offending block was thermalexpansion.block.conduit.BlockConduit@b9ff651 at ID 916. subHit value was 4" Link to comment Share on other sites More sharing options...
Lostonexxx Posted May 4, 2013 Share Posted May 4, 2013 You have to update your version of tekkit, both client and server. I had the same problem, but it was fixed in one of the updates. Link to comment Share on other sites More sharing options...
tim condron Posted May 4, 2013 Author Share Posted May 4, 2013 ahh thanks for the tip i thought my server was 1.0.3 but i see it is 1.0.0 Link to comment Share on other sites More sharing options...
Magicthize Posted May 5, 2013 Share Posted May 5, 2013 We're still having this problem on our 1.0.3 server. I've checked the files and they all appear to be running the most up to date versions. Link to comment Share on other sites More sharing options...
CanVox Posted May 5, 2013 Share Posted May 5, 2013 Which problem? Post a log. Link to comment Share on other sites More sharing options...
King Lemming Posted May 5, 2013 Share Posted May 5, 2013 annnd here is the server side error report from MFL "A critical server error occured handling a packet, kicking 507743 java.lang.RuntimeException: MicroblockSupporterTransformer cannot be used on blocks with multiple selection boxes. Offending block was thermalexpansion.block.conduit.BlockConduit@b9ff651 at ID 916. subHit value was 4" Read the error and think critically before blindly screaming "halp halp conduits are bugged sky is falling"...that is a VERY clear message and you should actually read it. It's an incompatibility between conduits and immibis' microblocks which can be fixed by editing the microblock config file. There is no bug. Link to comment Share on other sites More sharing options...
Robin^ Posted May 5, 2013 Share Posted May 5, 2013 Had the same problem (with 1.0.0), didn't think much of it initially, but I then decided that I wanted to get it fixed.. (thought crossed my mind that other stuff might have been broken & fixed aswell) So without even bothering to look for error's I just went straight to the website, grabbed 1.0.3 -> installed it to where I wanted -> and then copy'd over the world folder. After which this specific problem is gone, and none of my players are any wiser about what I've done to fix it, haha! Link to comment Share on other sites More sharing options...
tim condron Posted May 6, 2013 Author Share Posted May 6, 2013 Read the error and think critically before blindly screaming "halp halp conduits are bugged sky is falling"...that is a VERY clear message and you should actually read it. It's an incompatibility between conduits and immibis' microblocks which can be fixed by editing the microblock config file. There is no bug. that was not exactly obvous to me as i have absolutely no codeing experiance. i did read the error and noted it was an error server side and not client side, which is why i was looking for a work around in fear that changeing a config value or block ID could cause issues for players when they joined. now i did post this thread before bothering to even look at the server GUI because, hey this is a new modpack, i'd be skepticle if there were not any errors or bugs. updateing the server to version 1.0.3 flawlessly fixed the issue. now no need for you to be a douchbag that is going to make fun of people for haveing issues and next time you want to post a F****** flame READ THE WHOLE FRACKING THREAD! Link to comment Share on other sites More sharing options...
Magicthize Posted May 6, 2013 Share Posted May 6, 2013 Unfortunately I don't have a log to post, all I get is "Internal Server Error" any time I use a wrench on the redstone conduits. I've also noticed it happens on liquiduct as well. I'm wondering if some of the files on the server weren't properly updated even tho all the mods appear to be the current version. Link to comment Share on other sites More sharing options...
Magicthize Posted May 6, 2013 Share Posted May 6, 2013 Finally got the problem fixed. Performed a hard reset of all the necessary files and it fixed it. I'm guessing it was a file got corrupted or something odd happened during the upgrade process. Anyways I'm off to have fun with my new (working) toy! Link to comment Share on other sites More sharing options...
jon_888 Posted May 6, 2013 Share Posted May 6, 2013 as was said above - edit the immibus microblocks config put minus signs in front of the entry for redstone energy conduits, energy transfer and liquid transfer (not sure yet if there is any effect on liquiducts but be wise and do them anyway) Link to comment Share on other sites More sharing options...
CanVox Posted May 6, 2013 Share Posted May 6, 2013 You don't have to edit your configs, those configs were fixed as part of a tekkit release 4 days ago. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now