RamasesN3 Posted July 25, 2013 Posted July 25, 2013 I have been looking at a simple planter - harvester - fertilizer set up. Just a 3x3 area of wheat. The only problem I have is trying to get enough fertilizer into it. I've seen posts where people have 23 cows/sheep in a 1x1x2 hole on a sewer with a composter below, this is apparently the saturation point for the sewer/composter combo. What I would like to know is how many composters does it take to keep a fertilizer on a 3x3 farm full?
Dewfire Posted July 25, 2013 Posted July 25, 2013 I have 1 sewer with diamond range upgrade, and 20ish cows. It feeds two composters, and 3 fertilisers. Granted I'm not fertilizing large fields, but I have a large surplus.
PessimiStick Posted July 25, 2013 Posted July 25, 2013 I don't know the exact answer to your question, but I do have a counter question: Why do you need to have it running at full tilt 24x7? I have 4 24-cow Sewer/Composter combos filling two Fertilizers, and while that in no way keeps them stocked, it generates soooooo many mats that it doesn't really matter. I have a surplus of thousands of materials, with 4 Reactors running 9 types. On a 3x3 plot, you'd need a TON of Composters to actually run full-tilt. 3x3 Harvesters are incredibly fast, and I think Fertilizers can burn through 1 item per tick if necessary.
RamasesN3 Posted July 25, 2013 Author Posted July 25, 2013 I have 1 sewer with diamond range upgrade, and 20ish cows. It feeds two composters, and 3 fertilisers. Granted I'm not fertilizing large fields, but I have a large surplus. right so upgrades are the way to go then
Dewfire Posted July 25, 2013 Posted July 25, 2013 Upgrades are the way to go unless you just want a sewer for every square of animals yes. Also, I should note, the farms I run my fertilizers on are 1x1 squares for trees. A large 20x20 farm will eat it up as fast as you can feed it basically. http://imgur.com/uVfYWH0 This is how I have my tree farm set up for my BioReactors.
Discord Moderator plowmanplow Posted July 25, 2013 Discord Moderator Posted July 25, 2013 @Dewfire: I see you are using Sphax but are missing some textures. There is a significantly updated patch available for Sphax on the new Tekkit which has many updated textures. The BDCraft thread: http://bdcraft.net/community/pbdc-patches-rel-packs/tekkit-t274.html look towards the bottom of the first post and there are links to "PlowmanPlow's Pack". I update that frequently.
RamasesN3 Posted July 25, 2013 Author Posted July 25, 2013 I don't know the exact answer to your question, but I do have a counter question: Why do you need to have it running at full tilt 24x7? I have 4 24-cow Sewer/Composter combos filling two Fertilizers, and while that in no way keeps them stocked, it generates soooooo many mats that it doesn't really matter. I have a surplus of thousands of materials, with 4 Reactors running 9 types. On a 3x3 plot, you'd need a TON of Composters to actually run full-tilt. 3x3 Harvesters are incredibly fast, and I think Fertilizers can burn through 1 item per tick if necessary. I don't really "need to", I was just wondering what it would take.
weirleader Posted July 25, 2013 Posted July 25, 2013 @Dewfire: I see you are using Sphax but are missing some textures. There is a significantly updated patch available for Sphax on the new Tekkit which has many updated textures. The BDCraft thread: http://bdcraft.net/community/pbdc-patches-rel-packs/tekkit-t274.html look towards the bottom of the first post and there are links to "PlowmanPlow's Pack". I update that frequently. awesome -- I've been too lazy to solve this problem myself (and partly because I still don't 'get' how to identify all the various file locations/formats/conventions) and wasn't really sure where to look for the solution. Thanks for sharing that!
Dewfire Posted July 25, 2013 Posted July 25, 2013 @Dewfire: I see you are using Sphax but are missing some textures. There is a significantly updated patch available for Sphax on the new Tekkit which has many updated textures. The BDCraft thread: http://bdcraft.net/community/pbdc-patches-rel-packs/tekkit-t274.html look towards the bottom of the first post and there are links to "PlowmanPlow's Pack". I update that frequently. Nice, yea thanks, I just cobbled that one together myself with what I could find on the site. Some worked, some didn't, like weir said, I don't get what makes one work or not and I'd rather spend time playing! Edit: Well downloaded and placed it in, but it seems to be missing all the vanilla stuff. Yours just a patch?
weirleader Posted July 25, 2013 Posted July 25, 2013 the one I found and downloaded was a patch... and it's fixed a lot of my more glaring issues (I was missing a bunch of Galacticraft textures).
PessimiStick Posted July 25, 2013 Posted July 25, 2013 I believe it's a Tekkit patch for the base Sphax BDCraft.
Discord Moderator plowmanplow Posted July 25, 2013 Discord Moderator Posted July 25, 2013 Yes, that one is just a "patch" which should be overlayed on the base Sphax pack for the appropriate resolution. I have a *cough* full pack available, but the Sphax folks get cranky if you publish a link that contains their stuff. If you take a real close look at the URL for my downloads you can probably figure it out.
Dewfire Posted July 25, 2013 Posted July 25, 2013 Got it working Thanks, everything looks amazing now!
RamasesN3 Posted July 26, 2013 Author Posted July 26, 2013 I know it wasn't aimed at me but thanks for the link to the Sphax patch. Got my client running it now. Might try pointing Overviewer at it too.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now