Jump to content

Recommended Posts

Posted (edited)

I got my old modpack fixed thanks to the help of some people here in the forums, but now it runs really slow.

It runs in about 2 frames per seconds. It used to run pretty well, and I didn't really change anything since then (except fixes)

Also, the main menu is slow too. When I place the mouse cursore over an open (for example: join server) it changes the button to blue-ish only after about two seconds (which it should immediately).

And my friend can barely have it running, and his case is worse. It crashes for him.

I tried running it with pretty much nothing else open and playing on the lowest graphics settings, still the same.

 

My custom modpack: Modders In Space (by the way, it's hidden)

http://www.technicpack.net/modpack/modders-in-space.340368

 

I have 64 bit computer, windows, and java version(s), and 16 GB RAM, so those are not the problem.

I noticed it fills up my CPU pretty crazy-ly.

But again, my computer isn't the problem, because I used to run it pretty well while also having a server of it running at the same time, and a few friends with me.

Please help me.

Edited by omrizod
Forgot to add a link to my modpack
  • Moderators
Posted

How much ram have you allocated to Java in the tekkit launcher settings?

iIf you're below 3GB, bump it up to that. Don't go crazy high, it's counter productive. 

If this isn't your issue, add the appropriate version of Fastcraft. 

  • Discord Moderator
Posted
  • Why are you using old versions of some mods? Most (all?) 1.6.4 mods are frozen at this point so using a multi-verions-old copy of Treecapitator (for instance) is usually a bad idea.
  • You should probably turn off all the "udate checkers" in the configs for any mods you can since it they report updates which are for a newer version of MC/Forge.
  • I'm able to start your pack with 2G allocated in the Launcher (8G physical in the system). Responsiveness in the menus is what I would normally expect, and I get 35-60 FPS in the limited testing I did inside an SSP world. I suspect you have something going on with your graphics card or drivers.
Posted

I have 4 GB set in the launcher. I also tried to run it with 7 GB, didn't help.

 

(to plowmanplow) Maybe I should vaccum clean my computer hardware again. Is there another way I can check about my graphics card before doing that?

And thanks a lot for the help :D

  • Discord Moderator
Posted

If you are using an embedded (included in the motherboard) graphics card those can sometimes be too underpowered for complicated packs. If you have almost any add-in video card you shouldn't be seeing that poor performance.

Posted (edited)

I think it's not part of my motherboard. Pretty sure it's by it's own (if that's how you say it). But again, I used to run it pretty smoothly, with a server and a few friends at the same time. I think I'm gonna vaccum clean my computer today. Also, I just finished cleaning up my desktop. I had a lot of files and shortcuts, and it might have effected the performence. But I'm not sure how much does it matter.

Wait, I just thought about something. My screen resolution is set to 125%, because I used my TV screen for my computer for a while until a few weeks ago. Maybe that can be a problem?

(I can't upload another photo because it weighs too much, so I uploaded it to dropbox)

https://www.dropbox.com/s/rrbrifpd4ri5da7/Screen Resolution Is Set To 125%.png?dl=1

Here's a screenshot of my graphic card's properties window:

Graphics_Card_Adapter_Information.thumb.

Edited by omrizod
Some unfunctional photos were at the bottom without purpose
  • Discord Moderator
Posted

Yeah, that's a dedicated/discreet graphics card and should work just fine. There must be some other issue which has changed on your local system causing things to not run as expected.

Posted

Ok, so I vaccum cleaned my computer today. I also updated Java to the latest 64 bit version, and tried to minimize the quality and maximize the performence with AMD's Catalyst Control Center. Maybe it got improved just a bit. But still, can't play like that. 1-3 frames per second. I tried playing Tekkify, runs pretty smoothly on the official server from the main menu, and the single player is a little slower, but still pretty acceptible. There was a mod in my in-game mod list, which was marked in red. I tried running the game without it, doesn't make it any better.

Please help me.

  • Discord Moderator
Posted

If other modpacks run fine on your PC, and your modpack runs fine on other PCs (I've tried 3 personally), but your pack runs poorly on your PC then the common denominator is "something wrong with your PC.

Posted (edited)

AetherPirate - Yes.

Maybe it's because I used to have it on the old launcher, and there's some files left in the system, or something?

I'll try deleting it and redownloading.

Also, I played The Witcher 3 a few days ago. It run pretty smoothly. So I really don't think the hardware is the problem.

EDIT:

Doesn't help. I opened Task Manager on my second monitor, the CPU is always between 65-100, and there's nothing else open that takes CPU, I checked. Also, I'm running it on 7 GB RAM in the settings.

Edited by omrizod
Tested it. Now I have to update you
  • Moderators
Posted

Above 3GB or so is counter-productive. Are you running it with a texture pack? If so, remove it. 

Try running it with the console window open. Maybe it'll tell you what it is hanging up on. 

  • Discord Moderator
Posted
  • Dynamic Lights is a client only mod and must be removed when converting the pack to be a server.
  • Not 100% sure if it's in your server, but Smart Moving is also client only.

See where that gets you.

Posted

I fixed that, I just had to delete Dynamic Lights from the server.

Now I can't use either "Save", "Stop", or "op *name*". The OP text file doesn't help either.

Please help me with that.

Also, I'll check about the Smart Moving mod.

  • Discord Moderator
Posted

Please stop posting in the other thread. It is very distracting and I've already mentioned that before.

What is the context for you not being able to run those commands?

  • Where are you trying to use them? (client or server console?)
  • What are you using as your server binary?
  • Are you self-hosting this or is it running on some remote host?
  • What shows up in the server console when you try to use these commands?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...