No power converters mod??

[LFOD1836]

This means no powering the Quarry with nuclear or solar power, this is not acceptable. :(

[LFOD1836]

BTW, I did try putting the updated power converters mod for minecraft 1.4.6 in the mod folder and it crashed.

[dunkeroni]

Isn't that covered in the IC2 Transformers 1.7 addon?

[LFOD1836]

Isn't that covered in the IC2 Transformers 1.7 addon?

If anyone can provide a link it would be much appreciated.

[LFOD1836]

I think I found it..

http://forum.industrial-craft.net/index.php?page=Thread&threadID=5789

Now lets see if I can get it working.

[LFOD1836]

Ok so I finally got it going with the MV solar panel hooked up to the adjustable electric engine with glass cable, then to the quarry with the wood HV power pipe on the engine and then run to the quarry with stone conductive pipe from there. leave some room in case you blow up some pipe from over powering the engine. I have mine running at 75 EU/t to 30 MJ/t, and man does that baby fly!!!

[Seanbeag]

So is it acceptable to you now? I'm sure there's a sigh of relief going throughout the Tekkit dev community.

[Exarch42]

Excellent Screenshot LFOD. Works fine.

[Logan Rusling]

I admire your knowledge for these mods. I feel like a lost puppy.

[Maxis010]

But this means no oil and lava fabs, or water strainers, and those strainers were AWESOME when extracting oil from the sea

EDIT: If anyone can find an easy way to bring it back please tell me, it will need to be simple as I can mod minecraft but most of the people on my server can't

[Michael101]

I put Power Converters in my tekkit. I just make sure my brother and nephews have it also.

[Maxis010]

I put Power Converters in my tekkit. I just make sure my brother and nephews have it also.

How? It's not a simple drag and drop as it causes Lite to gray screen

[SemiPr0]

NM phased pipes do work, just ignore the pneumatic generator entirely.

[Hashmed]

How? It's not a simple drag and drop as it causes Lite to gray screen

I would also welcome an explanation on how this was achieved. I've been trying to get the mod to work but I still keep getting errors

[SemiPr0]

You really don't need the Energy Link unless you're trying to preserve a Tekkit Classic world.

[Hashmed]

The main reason I'm trying to get power converters running is for the oil fab, the lava fab, and the water strainers

[Teraku]

You need to install Power Converters, let it crash once to generate a config, and then edit the Power Converters block ID's in the config.

[Hashmed]

To the OP:

If you add power converters change the ID in the config file to 4088. That's a free one that worked for me

[RutibexRut]

You should try my PLUS Block map, it has all the mods you like (including Power Converters!) and a convenient shop system that you can use to trade resources for Diamonds and use those Diamonds towards top tier mod items. It's also a Technic Launcher custom pack:

http://forums.technicpack.net/threads/plus-block-way-better-than-feed-the-beast.35019/

[LFOD1836]

To the OP:

If you add power converters change the ID in the config file to 4088. That's a free one that worked for me

Thx I'll give that a shot..

[Cyravehl]

Brilliant, fixed it. Thank You.

[Millertime]

.

[Millertime]

You need to install Power Converters, let it crash once to generate a config, and then edit the Power Converters block ID's in the config.

Where is this config file located?

[Maxis010]

Where is this config file located?

Inside the config folder

Should be called PowerConverters.cfg or something similar

[Matt Help Anderson]

Help! I need the oil fab!!! How do I take the Power Converters mod from Tekkit and add it to my minecraft mods folder. I know NOTHING about programming, so pleeeeease help. It sounds like I need to get into the config folder...or something...*eek!*