LFOD1836 Posted January 4, 2013 Posted January 4, 2013 This means no powering the Quarry with nuclear or solar power, this is not acceptable. :( Quote
LFOD1836 Posted January 4, 2013 Author Posted January 4, 2013 BTW, I did try putting the updated power converters mod for minecraft 1.4.6 in the mod folder and it crashed. Quote
dunkeroni Posted January 4, 2013 Posted January 4, 2013 Isn't that covered in the IC2 Transformers 1.7 addon? Quote
LFOD1836 Posted January 5, 2013 Author Posted January 5, 2013 Isn't that covered in the IC2 Transformers 1.7 addon? If anyone can provide a link it would be much appreciated. Quote
LFOD1836 Posted January 5, 2013 Author Posted January 5, 2013 I think I found it.. http://forum.industrial-craft.net/index.php?page=Thread&threadID=5789 Now lets see if I can get it working. Quote
LFOD1836 Posted January 6, 2013 Author Posted January 6, 2013 Ok so I finally got it going with the MV solar panel hooked up to the adjustable electric engine with glass cable, then to the quarry with the wood HV power pipe on the engine and then run to the quarry with stone conductive pipe from there. leave some room in case you blow up some pipe from over powering the engine. I have mine running at 75 EU/t to 30 MJ/t, and man does that baby fly!!! Quote
Seanbeag Posted January 6, 2013 Posted January 6, 2013 So is it acceptable to you now? I'm sure there's a sigh of relief going throughout the Tekkit dev community. Quote
Logan Rusling Posted January 7, 2013 Posted January 7, 2013 I admire your knowledge for these mods. I feel like a lost puppy. Quote
Maxis010 Posted January 7, 2013 Posted January 7, 2013 But this means no oil and lava fabs, or water strainers, and those strainers were AWESOME when extracting oil from the sea EDIT: If anyone can find an easy way to bring it back please tell me, it will need to be simple as I can mod minecraft but most of the people on my server can't Quote
Michael101 Posted January 7, 2013 Posted January 7, 2013 I put Power Converters in my tekkit. I just make sure my brother and nephews have it also. Quote
Maxis010 Posted January 7, 2013 Posted January 7, 2013 I put Power Converters in my tekkit. I just make sure my brother and nephews have it also. How? It's not a simple drag and drop as it causes Lite to gray screen Quote
SemiPr0 Posted January 7, 2013 Posted January 7, 2013 NM phased pipes do work, just ignore the pneumatic generator entirely. Quote
Hashmed Posted January 7, 2013 Posted January 7, 2013 How? It's not a simple drag and drop as it causes Lite to gray screen I would also welcome an explanation on how this was achieved. I've been trying to get the mod to work but I still keep getting errors Quote
SemiPr0 Posted January 7, 2013 Posted January 7, 2013 You really don't need the Energy Link unless you're trying to preserve a Tekkit Classic world. Quote
Hashmed Posted January 7, 2013 Posted January 7, 2013 The main reason I'm trying to get power converters running is for the oil fab, the lava fab, and the water strainers Quote
Teraku Posted January 7, 2013 Posted January 7, 2013 You need to install Power Converters, let it crash once to generate a config, and then edit the Power Converters block ID's in the config. Quote
Hashmed Posted January 9, 2013 Posted January 9, 2013 To the OP: If you add power converters change the ID in the config file to 4088. That's a free one that worked for me Quote
RutibexRut Posted January 9, 2013 Posted January 9, 2013 You should try my PLUS Block map, it has all the mods you like (including Power Converters!) and a convenient shop system that you can use to trade resources for Diamonds and use those Diamonds towards top tier mod items. It's also a Technic Launcher custom pack: http://forums.technicpack.net/threads/plus-block-way-better-than-feed-the-beast.35019/ Quote
LFOD1836 Posted January 9, 2013 Author Posted January 9, 2013 To the OP: If you add power converters change the ID in the config file to 4088. That's a free one that worked for me Thx I'll give that a shot.. Quote
Millertime Posted January 15, 2013 Posted January 15, 2013 You need to install Power Converters, let it crash once to generate a config, and then edit the Power Converters block ID's in the config. Where is this config file located? Quote
Maxis010 Posted January 15, 2013 Posted January 15, 2013 Where is this config file located? Inside the config folder Should be called PowerConverters.cfg or something similar Quote
Matt Help Anderson Posted February 6, 2013 Posted February 6, 2013 Help! I need the oil fab!!! How do I take the Power Converters mod from Tekkit and add it to my minecraft mods folder. I know NOTHING about programming, so pleeeeease help. It sounds like I need to get into the config folder...or something...*eek!* Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.